Canon Oce PlotWave 360 - System and Network security

System and Network security
Ports - Protocols
Applications, protocols and ports
Printing applications: INBOUND and OUTBOUND ports and protocols used by the system
Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
Océ PostScript 3 driver TCP 515: LPR
Océ Publisher Express TCP 80: HTTP
TCP 443: HTTPS
Publisher Select 2 TCP 80: HTTP
UDP 515: Océ protocol for
Printer Discovery
ONYX UDP 161: SNMP
TCP 515: LPR
TCP 80: HTTP
Océ Reprodesk Studio TCP 515: LPR
TCP 80: Océ back-channel
(WAVE)
Novell NDPS printing TCP 515: LPR
LPR printing TCP 515: LPR
FTP printing TCP 21: FTP
TCP 4242 (for data channel in
FTP passive mode)
Notes:
Océ back-channel is an Océ proprietary protocol used to retrieve information from the printer
(status, media loaded...) and to display it in the application or driver.
Control management: INBOUND and OUTBOUND ports and protocols used by the system
Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
PING IPv4 ICMPv4
nslookup UDP local port : any
UDP remote port : 53
SNMP based applications UDP 161: SNMP
Name resolution Outgoing connection:
Local port (on controller):
UDP(/TCP) <dynamic value>
Remote port (on DNS server):
UDP(/TCP) 53
4
System and Network security
Chapter 7 - Security on Océ ColorWave 810, Océ ColorWave 900 and Océ ColorWave 910
385