5.
Check there is no red cross icon in the report.
If there is a red cross, solve the issue or check the solutions in the troubleshooting section below.
Authentication on the system user panel
Introduction
On the system user panel, tap the 'log in' icon to display the window.
• Select the domain.
• Type in the user name and the password.
After authentication, the name of the user is displayed in the top menu.
Troubleshooting
Introduction
When an error occurs during the process of authentication by user name and password, go to the
'Security' - 'Configuration' page and
Validate the configuration
on page 336.
Find below the list of possible causes of errors that can occur during the validation of the
configuration.
Authentication on the system user panel
190
Chapter 4 - Security on Océ PlotWave 345/365 and Océ PlotWave 450/550
To Next Page
Loading...
