Canon Oce PlotWave 360 - Page 270

* Océ back-channel is an Océ proprietary protocol used to retrieve information from the printer
(status, media loaded...) and to display it in the application or driver.
(1)
FTP passive mode only (FTP active mode not supported).
Scanning applications with Océ ColorWave 650 R3.x: INBOUND and OUTBOUND ports and
protocols used by the system
Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
Scan to File: SMB TCP 139, 445
UDP 137, 138, 445
Scan to File: FTP
FTP command
(1)
:
- Local: TCP any
- Remote: TCP 21
FTP Data
(1)
:
- Local : TCP any
- Remote: TCP any
Scan data retrieval from Smart
Inbox (Scans)
TCP 80: HTTP
TCP 443: HTTPS
Notes:
(1)
FTP passive mode only (FTP active mode not supported).
Control management with Océ ColorWave 650 R3.x0: INBOUND and OUTBOUND ports and
protocols used by the system
Application /Functionality INBOUND ports on the con‐
troller: protocol
OUTBOUND ports from the
controller: protocol
PING IPv4 ICMPv4
PING IPv6 ICMPv6
nslookup UDP local port : any
UDP remote port : 53
SNMP based applications UDP 161: SNMP
Name resolution Outgoing connection:
Local port (on controller):
UDP(/TCP) <dynamic value>
Remote port (on DNS server):
UDP(/TCP) 53
Océ Express WebTools TCP 80: HTTP
TCP 443: HTTPS
Océ Account Center TCP 80: HTTP
Accounting information re-
trieval
TCP 80: HTTP
Océ Meter Manager UDP 161: SNMP
Océ back-channel TCP 65200 for OCI back-chan-
nel
4
Applications, protocols and ports used in the Océ ColorWave 650 R3.x system
270
Chapter 5 - Security on Océ ColorWave 550/600/650 (and Poster Printer)