2.
In the 'Manage IP filter lists' tab click 'Add'
3.
Enter a filter name and a description and click 'Add'
4.
Click 'Next' to open the wizard
5.
Check the 'Mirrored' checkbox and click 'Next'
6.
Select 'My IP address' as the 'Source address and click 'Next'
7.
Select 'A specific IP address or subnet' as 'Destination address' and enter the IP address of the
controller
Create the filter list
Chapter 2 - Security on Océ PlotWave 300/350, PlotWave 750, PlotWave 900 and ColorWave 300
47
To Next Page
Loading...
