44
Shooting – The Basics
3
Compose and
shoot the second
image so that it
overlaps the first.
z Minor discrepancies in
the overlap can be
corrected with the
software.
z An image can be retaken. Press or to
return to that frame.
4
Use the same procedures to
shoot the remaining frames.
z A maximum of 26 images can be recorded
either horizontally or vertically.
5
Press the SET button after the
last shot.
Sequence
z A custom white balance setting (p. 68)
cannot be set in / mode. To use a
custom white balance setting, first set it
in another shooting mode.
z The settings in place for the first image
are locked in and cannot be changed for
subsequent shots.
See page 124 for settings that can be
changed in this mode.
To Next Page
Loading...
