Canon Powershot SD700 IS

Setting the Print Style
After setting the print style, select the image(s) to print. The
following print settings can be selected.
*Default setting
III Standard* Prints one image per page.
mIndex
Prints the selected images together at a
Print Type reduced size in an index format.
lIlm Both
Prints the images in both the standard and
index formats.
~ Date (On/Off*) Adds the date to the print.
II File No. (On/Off*)
Adds the file number to the print.
Clear DPOF data (On*/Off)
Clears all print settings after the images
print.
Set the mode dial to [E] . (playback) ~ ~
(Print) Menu ~ [Print Settings].
See Menus and Settings (p. 26).
Select [Print Type], [Date], [File No.] or
[Clear DPOF data] and then specify the set-
tings .
• The Date and File No. settings change according to the
Print Type as follows.
Index
[Date] and [File No.] cannot
be set to [On] at the same
time.
- Standard or Both
[Date] and [File No.] can
be set to [On] at the same time,
however, the printable information may vary between
printers.
91