Operating
the
Shutter
Remotely
You
can
record still images by using a computer
to
control the shutter
of
a connected camera.
This
is
particularly useful for checking images on the larger display
of
the computer
as
you
record them and
for
high volume photography
without
worrying about filling the camera's
memory card.
PreRoring
for
Remote
Shooting
1 Attach
the
supplied interface cable
to
the
computer's
USB
port and
the
camera's
DIGITAL terminal and place
the
camera
in
the
correct mode
for
connecting.
- Methods
for
connecting
the
camera
to
the
computer and placing it
in
the
correct mode for connecting vary between camera models.
Please
refer
to
the
Camera User Guide.
-If
the
Camera Control
Window
does not automatically appear,
click
the
[CameraWindow]
icon
in
the
Dock (the bar
at
the
bottom
of
the
desktop).
The
Camera Control
Window
will display.
2 Open
the
lens
cover or remove
the
lens
cap
on models equipped
with
them.
Proceed
to
the next step
if
your model does
not
have one.
3 Click
the
[Remote shooting] tab.
4 Click [Starts Remote Shooting].
5 Select a destination
for
the
captured images and
click
[Choose].
To Next Page
Loading...
