Canon Powershot SD700 IS

641 Using the Software on the Macintosh Platform - Advanced Techniques
RemoleCaRlure Jask Window
The RemoteCapture Task window has the following features.
Size and Resolution Selector
Selects
the size and resolution at which
images are captured.
Slide
this to zoom
the camera in or out.
Start/Stop Viewfinder
Button
Starts or stops the
viewfinder display.
Release
Button
Releases the
shutter.
Refresh
Button
Resets the exposure,
focus and
white
balance.
...----- Rotation Settings
Sets the rotation
parameters for
images after they are
captured.
settin",~ ~
.
•
':)
. '
\
'II
.
~
;
u .... , .......
I
Viewfinder Display
Click
the [Start/Stop
Viewfinder] button
while a connection to
the camera is open to
display the image
appearing in the
camera's viewfinder.
Shows/Hides the
viewfinder or
detailed settings
area.
I
"If Hide VieWFinder
-------
"/f·HideshootingdetaUs
You can add -----8A.dd comments shownbelow
comments to images
by placing a check
mark here and
typing text in the
boxes below.
Set the camera shooting settings here.
• The settings available in the RemoteCapture Task window vary between
camera models.
• RemoteCapture
Task locks the exposure and focus settings for the subject
matter in the Viewfinder section. If the lighting or distance to the subject
changes, click
to reset these settings.