This
chapter explains the procedures for using ImageBrowser
to
download the camera's images'
to
the computer and print them.
Read
this chapter after completing the preparations
in
the Using the Software on the
Macintosh Platform - Preparations section.
Downloading
Images
to
the
Computer
Begin
by
downloading the images
to
your computer. The downloading procedure
is
slightly
different according
to
whether you
are
using a camera
to
computer connection
(see
below) or
a memory card reader
(p.
48).
CameEa
to
CompUleE
COlne,lioll
1 Attach
the
supplied interface cable
to
the
computer's
USB
port and
the
camera's
DIGITAL Terminal. Prepare
the
camera
for
communication
with
the
computer.
~
Procedures
for
attaching
the
camera
to
the
computer and placing it
in
LIt
the
correct mode
for
connecting vary
between
camera models.
See
the
Camera User Guide.
The
Camera Control
Window
will appear.
If it does
not
open, click the [CameraWindow] icon
in
the Dock (the bar at the bottom
of
the desktop).
To
set whether this
window
automatically opens when you connect the
camera
to
the computer, remove the check mark from the [Start when a camera
is
connected]
in
the
[File]
menu
in
the Camera Control window.
To Next Page
Loading...
