Canon Powershot SD700 IS

ISO Adjusting the ISO Speed
Q OM
",~~,~J
Raise the ISO speed to use a fast shutter speed when you wish to
reduce the effects
of camera shake or avoidblurry subjects, or to
turn the flash off when shooting
in a dark area.
Press the ISO button and switch settings.
eCycle through the fIJ/~/~/~/~/~/~ speeds with
each press of the
ISO button.
eSelecting
fIJ (Auto) sets the optimal ISO speed according
to the light level when shooting. Since the ISO speed setting
will automatically be raised
in dark places, the camera will
select a faster shutter speed and reduce the chances of
camera shake.
eSelecting
~ (High ISO Auto)* sets the sensitivity to a
higher value than the
fIJ setting. This sets the shutter
speed faster, reducing the potential for camera shake or
blurry subjects compared with the
fIJ setting.
* Noise
in the recorded image may be higher than for the
ffiI setting.
eWhen
in ~ (Auto) shooting mode, only fIJ or ~ can be
selected.
en
~
o
o
r+
:i'
to
67