Operating
the
Shutter
Remotely
You
can
record still images by using a computer
to
control the shutter
of
a connected camera.
This
is
particularly useful
for
checking images on the larger display
of
the computer
as
you
record them and
for
high volume photography
without
worrying about filling the camera's
memory card.
Rregoring
for
Remote
Shooling
1
Attach
the
supplied interface cable
to
the
computer's
USB
port
and
the
camera's
DIGITAL
terminal
and place
the
camera in
the
correct
mode
for
connecting.
• Methods
for
connecting
the
camera
to
the
computer
and placing
it
in
the
correct
mode
for
connecting vary
between
camera models.
Please
refer
to
the
Camera User Guide.
• Perform
the
settings described in First Time Camera
is
Connected
to
a
Computer
(p. 17)
the
first
time
you connect
the
camera
to
the
computer.
The
Camera Control
Window
will display.
2 Open
the
lens cover
or
remove
the
lens cap on models equipped
with
them.
Proceed
to
the next step
if
your model does not have one.
3 Click
the
[Remote shooting] tab.
4 Click [Starts Remote Shooting].
5 Select a destination
for
the
captured images and click [OK].
To Next Page
Loading...
