Canon Powershot SD700 IS

361 Using the Software on the Windows Platform -Advanced Techniques
RemoteCapture task Window
The RemoteCapture Task window has the following features.
Shows/Hides the
viewfinder or detailed
settings area.
You can add
comments
to images
by placing a check
mark here and
typing text in the
boxes below.
Viewfinder Display
Click
the [Start/Stop
Viewfinder] button
while a connection to
the camera is open to
display the image
appearing in
the
camera's viewfinder.
Size and Resolution Selector
Selects
the size and resolution at which images are captured.
_---- Rotation Settings
Sets the rotation
parameters for
images after they are
captured.
Release
Button
Releases the
shutter.
.';;;;;;;;;;;;;;;;';;;;;;;;;;;;- Slide this to zoom
the camera in or out.
Start/Stop Viewfinder
Button
Sta rts or stops the
viewfinder display.
Refresh Button
Resets the exposure,
focus and
white
balance.
Set
the basic camera settings here.
-The settings available in the RemoteCapture Task window vary between
camera models.
- RemoteCapture
Task locks the exposure and focus settings for the subject
matter in the Viewfinder section. If the lighting or distance to the subject
changes, click
to reset these settings.