10
IRead This First
Before
You
Connect
the
Camera
to
the
Computer
Precautions
for
Connecting
the
Camera
to
the
Computer
• The connection may
not
operate correctly if you attach the camera
to
the computer
with
an
interface cable
via
a
USB
hub.
• The connection may
not
operate correctly if you are using other
USB
devices, excluding
USB
mice or keyboards, at the same time
as
the camera. If this occurs, disconnect the other
devices from the computer and try reconnecting the camera.
•
Do
not
connect
two
or more cameras at the same time
to
the same computer. The
connections may
not
operate correctly.
• Never allow the computer
to
go into standby (sleep) mode while a camera
is
connected
via
the
USB
interface cable. If it does happen, never disconnect the interface cable. Try
to
awaken
the computer
with
the camera
in
the connected state. Some computers will
not
awaken
properly
if
you disconnect the camera while they are
in
standby (sleep) mode.
Please
refer
to
your computer manual
for
instructions regarding the standby (sleep) mode.
• You are recommended
to
power
the
camera from a household power source
(AC adapter) when connecting
to
a computer (if available
for
your camera
model). Ensure
that
you
use
fully charged batteries if you will
not
be using a
household power source.
•
See
the
Camera User Guide
for
procedures connecting
the
camera
to
the
computer.
To Next Page
Loading...
