94
I
Viewing
Images
on
a
TV
set
You
can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied
AV
Cable.
Turn
off
the
Camera
and
the
TV.
C(]lnl'1lec:t
the
AVcable
to
the
camera's
AIV
terminal.
eOpen the DIGITAL terminal cover
with a fingernail from the left side
and plug the
AV
cable
in
all the
way.
Plug
the
other
ends
of
the
AV
cable
to
the
VIDEO
IN
and
AUDIO
IN
jacks
on
the
TV.
Turn
on
the
TV
and
switch
it
to
video
mode.
Turn
on
the
camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards
(p.
30). The default
setting varies between regions.
- NTSC: Japan, U.S.A., Canada, Taiwan and others
-
PAL:
Europe, Asia (excluding Taiwan), Oceania and others
If the video system
is
set incorrectly, the camera output may
not display properly.
To Next Page
Loading...
