Canon Powershot SD700 IS

Select an image or record a sound.
eStart-up Image
Use the • or .. button to select
the image you wish to register and
press the
FUNC./SET button.
eStart-up, Operation, Self-timer
and Shutter Sounds
Select D (Record) and press the
FUNC./SET button. After record-
ing, select
~ (Register) and
press the
FUNC./SET button.
- Recording will automatically
stop when the recording time elapses.
-
To play it, select a (Play).
-
To exit instead of registering, press ~ (Exit).
Select [OK] and press
eTo cancel registering, select [Can-
cel].
See the supplied Software Starter Guide for more information
on creating and adding to the My Camera data.
97