AF-assist Beam is set to
[Off].
The camera moves/when
the shutter button is
pressed.
The subject is
underexposed because
the surroundings are too
bright.
Subject is too far away
for flash to reach.
eln dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned
off,
set it [On]
to
activate it
(p. 27). Take care not to obstruct the
AF-assist Beam with your hand when
used.
eSet
IS
mode
to
a other than
[Off] (p. 35).
eSetting the self-timer to
mP]
(2
seconds) delays the shutter release
for 2 seconds and allows the camera
to stop shaking, thus preventing a
blurred image
(p.
41).
Even better results can be obtained
by placing the camera on a stable
surface or a to shoot.
at the correct
eSet
the flash to
Guide
eSet
the exposure compensation to a
positive (+) setting (p. 54).
e Use AE lock or use the
me~ter'lnq
function
eShoot
within correct shooting
distance
of
the subject when using
the built-in flash (p. 120).
eRaise
the ISO speed and then shoot
-I
..,
o
s::::
C"
CD
CJ)
::::r
o
~
:;j
co
101
To Next Page
Loading...
