Light
is
reflected back
from the eyes when the
flash is used
in
dark
areas.
Memory card slot/battery
cover was opened with
power on.
eUse the m(Auto Red-eye
Reduction) or
EI
(Red-eye
Reduction On) mode (Basic Guide
p.
9). For this mode to be effective, the
subject must
be
looking right at the
red-eye reduction lamp. Try asking
them to look directly at the lamp.
e Even better results can
be
obtained
by increasing the lighting
in
indoor
settings or approaching closer to the
subject. The shutter will not activate
for approximately 1 second after the
red-eye reduction lamp fires
in
order
to improve the effect.
close the memory card slot/
battery cover and then turn the
power on and then off again. (Basic
Guide
103
To Next Page
Loading...
