eWhen transferring images to your computer using the Direct
Transfer menu, you attempted to select
an
image with corrupted
data or
an
image taken with a different camera or data type.
You
may have also attempted to select a movie when [Wallpaper]
was selected
in
the Direct Transfer menu.
eYou attempted to erase or edit a protected image, movie or
sound memo.
eToo many images have been marked with print settings, transfer
or slide show settings. Cannot more.
eThe
computer was unable
to
download the image due
to
the
large amount of images (approx. 1000) stored
on
the memory
card.
eCamera detected
an
error while moving the lens and cut the
power automatically. This error message may appear if you
press
on
the lens while it
is
moving or turn
on
the camera
in
a
dusty or sandy environment Turn on the camera again and
shoot or playback images. Take the camera
to
a service center if
this message appears frequently because there may be a
problem with the lens.
.............•.......•......
..
:
".
110
e(xx: number) Camera detected
an
error. Turn the power off and
then back
on,
then shoot or play back. A problem exists if the
error code reappears. Note the number and contact your Canon
Customer Support Help Desk. If an error code displays directly
after taking a picture, the shot may not have been recorded.
Check image
in
mode.
To Next Page
Loading...
