You
may be able to check the charge state depending upon how
the terminal cover is attached (Fig.
C,
D).
Fig. C Fig. 0
Charged
Battery
Attach it so the &
is
visible
Spent
Battery
Attach it the
opposite way to
Fig.
C.
112
• You are
recommended
to
use
it
in
the
camera
until
it
is
completely
discharged
and
to
store
it
in an
indoor
location
with
low
relative
humidity
and
between
the
temperatures
of
o-
30°C
(32 - 86
OF).
Storing a fully charged battery for long periods
of
time (about one
year) may shorten its life cycle or affect its performance. Ifyou do
not use the battery for long periods
of
time, charge it fully and
discharge it fully
in
the camera about once a year before
returning it to storage.
•
Since
this
is
a
lithium-ion
battery,
you
need
not
completely
discharge
it
before
recharging.
•
It
takes
approximately
2
hours
5
minutes
to
fully
charge
the
battery
from
a
fully
discharged
state (based
on
Canon's
testing
standards).
• Charging it within a temperature range of 5 -
40°C
(41
- 104
OF)
is
recommended.
• Charge times may vary according to the ambient temperature
and the battery's charge state.
• You are
advised
to
charge
the
battery
on
the
day
of
use,
or
one
day
before,
to
ensure
a
full
charge.
Even charged batteries continue to discharge naturally.
•
If
the
performance
of
the
battery
diminishes
substantially
even
when
it
is
fully
charged,
its
life
has been exceeded
and
it
should
be replaced.
To Next Page
Loading...
