e Before attaching the bracket to the flash, check that the
lithium battery (CR123A or
DL123)
is
installed.
e
To
illuminate the subjects properly, install the flash
so
that it
is
up against the side of the camera and parallel with the
camera's front panel.
e A tripod can
be
used even when the flash is attached.
Batteries
eCharge becomes Severely Limited
If the battery usage time has considerably diminished, wipe the
battery terminals well with a dry cloth. The terminals may be dirty
from fingerprints.
eusage
in
Cold Temperatures (Less than O°C/32°F)
Get a spare generic lithium battery (CR123A or DL123).
You
are
recommended to place the spare battery
in
your pocket to warm it
up before switching
it
for the battery
in
the flash.
eNon-Use over Extended Periods
Leaving batteries
in
the High-Power Flash could allow the battery
fluid to leak, damaging the product. Remove the batteries from the
High-Power Flash and store them
in
a cool, dry place.
117
To Next Page
Loading...
