761
Appendices
5 Delete
your
camera model name
or
[Canon Camera] in
the
[Scanners and
Cameras Properties] dialog.
Windows Me
users
should delete their
camera model or [Canon Camera]
in
the
[Scanners and Cameras] folder.
Windows
2000
Select your camera model name or [Canon Camera] and click [Remove].
Windows
Me
Select your camera model name or [Canon Camera], right-click the mouse and select
[Delete].
Windows
98
SE
Select your camera model name
or
[Canon Camera] and click [Remove]. Then turn
off
the
camera and remove the interface cable from the computer's
USB
port.
6 Click
the
Windows
[Start] menu and select [Programs],
followed
by [Canon
Utilities], [Camera TWAIN Driver x.x] and [Uninstall TWAIN Driver]. A version
number
appears in place
of
the
"x.x".
• Windows 2000, Windows 98
SE:
Perform
Step
6 with no substitutions.
• Windows Me: Substitute the following for the underlined portions of
Step
6.
[Camera WIA Driver x.x], [Uninstall WIA Driver]
The uninstall process will start.
To
connect the camera
to
the computer and download after this point,
use
the following
procedures.
1.
Reinstall the driver.
2.
Connect the camera
to
the computer
with
the interface cable.
Uninstalling
the
SoftWare
(Mac:intosh)
.
Uninstall the programs by dragging the application's folder (the folder
in
which
it
was installed)
into the Trash, and then empty the Trash.
To Next Page
Loading...
