Trim the image.
Changing the Size of the Trimming Frame
• Press the up and down buttons to adjust the size
of
the
trimming frame.
• The trimming frame can be changed to a minimum selection
of
approximately half the displayed image (in width and III
height) or a maximum selection that is virtually the same size
as the image.
• Expanding the trimming frame beyond its maximum size
cancels the trimming setting.
• When printing an image that has been magnified using the
trimming option, the image quality may become coarser and
grainier depending on the level
of
magnification.
Rotating the Trimming Frame
• You can rotate the trimming frame using the left and right
buttons.
Moving the Trimming Frame
• Press the SET button and use the up, down, right and left
buttons to move the trimming frame. Pressing the
SET
button again allows you to change the size
of
the frame and
to rotate
it.
Press the MENU button,
select [OK] and press the
SET button.
Selecting [Cancel setting] cancels
the selected trimming setting. If
[Edit] is selected, the display
returns to the previous screen.
17
To Next Page
Loading...
