Cancel Printing
• To cancel printing between images printed, press the SET
button. A confirmation dialog appears. Select [OK] and press
the SET button. The printer will stop printing the current image
and eject the paper.
Restarting Printing
• Select [Resume] and press the SET button. The remaining
images can be printed.
• Printing cannot
be
restarted under the following circumstances.
• If the print settings have been changed before restarting.
• Ifthe image for which the print settings were set has been
deleted before restarting.
• If there is very little free space on the memory card when
printing is canceled, it may not be possible to restart printing.
• Ifprinting is canceled because the camera battery is depleted, it
may not be possible to restart printing.
(Replace with a fully charged battery pack
or
new batteries,
then turn the camera power on again. If you intend to use
an
extended period
of
time, you are recommended to power the
camera with a compact power adapter (sold separately).)
Printing Errors
• An error message appears if an error occurs for some reason
during the printing process. When the error is resolved, printing
will automatically resume. If printing does not resume, select
[Continue] and press the SET button. If [Continue] cannot be
selected, select [Stop], press the SET button and restart the
print job. See
List
of
Messages (p. 50) for details.
• On printers equipped with
an
operation panel,
an
error number
or message displays
on
the panel. Please refer to the printer
user guide for the remedies corresponding to the error numbers
or messages.
49
To Next Page
Loading...
