Canon Powershot SD700 IS

..
2. Installing the Battery.
1. Slide the memory card slot/battery cover and open it ( (j),
(2) ).
2. Push the battery lock in the direction of the arrow ( @) and
insert the battery until it locks.
To remove the battery, push the battery lock in the direction of
the arrow ( @) and hold it while pulling the battery out.
3. Inserting the Memory Card.
1. Insert the memory card until it clicks into place.
2. Close the memory card slot/battery cover ( (j), (2)).
mSee the Advanced Guide: Handling the Memory Card (p. 113)
m See the Advanced Guide: Formatting Memory Cards (p. 32)