Canon Powershot SD700 IS

~. Shooting
en
::T
o
sa.
:i'
cc
I
Indicators
2.. Turn the mode dial to CI (Auto).
1. Press the power button. Power button
The start-up sound will play and the
start-up image will display
in the LCD
monitor.
• Pressing the power button again
turns the power off.
•
To switch to the setting that mutes
all sounds (except for the warning sound), press and hold the
DISP. button while pressing the power button.
m·See.theAdvancedGuide:Using·the LCD Monitor(p. 15)
mSeelheAdvanced Guide: Power Saving Fupction (p .• 22)
mSeethe Advanced Guide: Setup Menu (p.28)
m Seethe Advanced Guide: •• My •• Camera Menu(p. 30)
3. Aim the camera at the subject.
4. Focus and shoot.
1. Press the shutter button
halfway to focus.
When the camera focuses, the
camera beeps twice and the
indicator lights green.
----------.,15