eThe camera will switch to color input
mode and the display will alternate
between the original image and the
color swap image (using the previ-
ously set color).
Aim
the
camera
so
that
the
original
color
appears
at
the
center
of
the
LCD
monitor
and
press
the
•
button.
eOnly
one color can be specified.
eyou
can use the
..
or
..
button to specify the range
of
col-
ors that are swapped.
• -5: Only takes the color that you want to swap
• +5: Also takes colors close to the one that you want to
swap
Aim
the
camera
so
that
the
desired
color
appears
at
the
center
of
the
LCD
monitor
and
press
the
•
button.
• Only one color can be specified.
Press
<8>
to
complete
the
setting,
then
shoot.
e The default setting for color swap mode changes green into
white.
e
You
may not obtain the expected results if you use the
flash.
e The colors specified
in
the color swap mode are retained
even if the camera's power is turned off.
II
en
::r
o
2-
:i'
cc
65
To Next Page
Loading...
