Canon PowerShot SX160 IS - Setting the Date and Time

Initial Preparations
~Display Language
The display language can be changed as needed.
&/~ 'I Enter Playback mode.
::
. ~
Press the <[E]> button.
,2 Access the setting screen.
Press and hold the <@> button, and
then immediately press the
<MENU>
button.
.,, .. , ................ ,.,.w .. •.·.··WN·····'··N··.•.•.·.•.,.•.·.•. • .wc.·.•.·.•.·.w.w.·'' ~~ •.·.· ························.·.··•·.w.·.•.·.·.·.,.·.,·w·····•···'NNmm.•.w/
,
3 Set the display language.
Press the <.A..><'Y><~><~> buttons or
turn the
<@> dial to choose a language,
and then press the <@> button.
Once the display language has been set,
the setting screen is no longer displayed.
' The current time is displayed if you wait too long in step 2 after pressing
the<@> button before you press the <MENU> button. In this case,
press the
<@> button to dismiss the time display and repeat step 2 .
.
,,,. You can also change the display language by pressing the <MENU> button
and choosing
[Language~ on the [tTl tab.
17