Overall
The printer clear-coats the entire print area.
If selecting Auto produced unsatisfactory clear coating effects, selecting Overall may improve the
results.
Important
• Depending on the type of paper selected from Media Type on Quality & Media, you may not be
able to select Overall.
For paper for which Overall can be used, select the paper you want to use from "Paper
Information List" and check the information.
•
If Overall is selected and the media type is changed to one that cannot use Overall, the clear
coating area setting is changed to Auto.
3.
Complete the setup
Click Print.
When printing is executed, the clear coating effect that was set is added when the document is printed.
477
To Next Page