Caution
•
Be careful not to injure yourself or scratch the printer when cutting.
6.
If the Carriage is on the left, move the Carriage to the right until it stops.
Important
•
Always move the Carriage to the right side. If the Carriage is on the left, a Carriage error may
occur when you turn on the printer.
7. While holding the leading edge of the roll paper in the middle and gently and evenly pulling
until it reaches the output guide (A) position, align the right edge of the roll paper parallel to
the paper alignment line (B), and lower the release lever.
607
To Next Page