1023
Cause
Received a print job that is longer than the paper length remaining on Roll paper 2.
What to Do
• Continuing to print
To continue printing, tap Print with the loaded paper. on the touch screen.
However, the roll paper may run out during the print job and you may not be able to print all of the
document.
• Replacing paper
Tap Replace the paper and print on the touch screen.
Change the Paper Source in the printer driver, or replace the paper with paper of the right length for
the print job, and then try again.
Removing the Lower Roll from the Roll Unit
Loading the Lower Roll on the Roll Unit
• Stopping printing
To stop printing, tap Cancel on the touch screen or press the Stop button.
689
To Next Page
Loading...
