30
English
CONNECTION TO OTHER DEVICES
Please connect other audio devices directly to the Smart Speaker (Master) via
audio cable (e.g. optical digital audio cable, coaxial digital audio cable, etc.)
and not to the TV device. This is the only way to ensure that the best possible
multichannel audio format / signal is reproduced. Players can be: Game con-
soles, DVD / BluRay players, satellite receivers, CD players, etc.
Optical digital input
1
Connect the DIGITAL OPTICAL input connector (5) on the Smart speaker
(master) to the OPTICAL OUT connector of your digital device with an
optical cable.
2
On the Smart-remote, use the up and down arrows
( , )
to select the input
[TV] and start playback on the digital device.
Note:
• Make sure you have removed the protective cap from both ends of the
optical cable.
• In case the digital optical input is in use already please use a different
input.
Coaxial digital input
1
Connect the DIGITAL COAXIAL input (3) on the Smart speaker (master) to
the digital coaxial output connector of your digital device with an digital
coaxial cable.
2
On the Smart-remote, use the up and down arrows
( , )
to select the
input [DVD] and start playback on the digital device.
To Next Page
Loading...
