24
English
SPEAKER SETUP
Place the Smart speakers in the desired location and plug each of them into
the wall outlet using the power cord and set the power switch to „ON“. To
connect the Smart speakers to your TV or other sources, first make sure they
are plugged in.
FUNCTIONALITY AND CONNECTIONS
The products of the Smart series operate according to the master-slave prin-
ciple. The sources are primarily connected to the master loudspeaker. The sla-
ve loudspeaker is wirelessly controlled and supplied with the audio signal by
the master loudspeaker. The master loudspeaker is automatically connected
to the slave loudspeaker as factory default. The master loudspeaker is in this
case the left speaker and the slave speaker is always the right loudspeaker. Of
course this assignment can be changed if necessary. For details on connec-
ting additional Smart speakers, see page 34.
Note:
• The Smart loudspeakers can also be connected to each other digitally by
using a coaxial cable. To do this, connect the coaxial output of the master
speaker to the coaxial input of the slave speaker.
To Next Page
Loading...
