EasyManua.ls Logo

CanyCom S100 - Starting the Engine

CanyCom S100
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 16 -
6
Operation
Reservoir tank
1. Open the engine cover, and fix it firmly with the
stay-bar.
2. Check the level of the engine cooling water in the
reservoir tank. It should be between the [FULL] and
[LOW] lines. If the level is low, add water.
Cooling water amount: 1.8 liters
Reservoir tank capacity: 0.7 liters
Mixing of antifreeze (See page 37)
6.2. Method of Starting
Before starting the engine, check that there is no flammable material
around the engine, and that the area around the engine has good
ventilation.
6.2.1 Preparation for Starting
1. Open the engine cover, and lock it with the stay-bar.
(See page 15)
2. Turn the fuel cock to ON.
Fuel cock
Neutral
Steering
lever
3. Check that the steering lever is in the [NEUTRAL]
position.