Operation
6
6.5 Operating Dump
Load deck
support bar
• Falling load deck can cause
injur
y
or
death.
• Always fix load deck support bar
before
doing any work under the load
deck.
• Do not raise or lower load deck or
dump
load when anybody is
st
anding
near
load
deck.
Do not discharge load to the slope
valley
side by tilting the bed sideways. The
vehi-
cle may be turned over, resulting in a
seri-
ous
accident.
3677M-0605-090
• Do not
per
form dumping operation on a sharp slope. The body
becomes
unstable, and it may cause a serious accident. If the dumping operation
must
be performed unavoidably on the slope, operate the vehicle
carefully.
• Do not perform the tilting operation of the bed on a slope. The body
becomes
unstable, and it may cause a serious
accident.
Raising Dump Body
1. Start the engine, move the throttle lever to the
[ (HI)] position, and increase the engine speed.
2. Remove the lock plate from the dump lever.
To Next Page
Loading...