Operation
6
6.3 Method of Operating
• Do not allow anyone to come near the machine.
• The front lower and rear areas of the machine are dead zones.
Before operating the machine, remove all obstacles and personnel
from these areas.
• Always check areas around the machine when turning.
• Do not make sudden turns when driving the machine. The operator
may be thrown from the machine or the machine may also turn over,
resulting in serious injury or death of the operator or bystanders.
Parking brake
pedal
Preparation for Moving
1. Check that all areas around the machine are safe.
2. Check that parking brake is unlocked.
3. Push the throttle lever to the [ (HIGH
SPEED)]
position to increase the speed of the
engine.
To Next Page
Loading...