CanyCom S160 - Contents of the Tool Bag

Specications
-14-
3
Model and Type
S160
Swivel Dump
Speed km/h 0-7.0
Minimum Turning Radius m 3.2
Gradability Degrees 25(Empty)
Operating Temperature °C -15~40
Altitude m 0~1,500
HST Oil Capacity L 32
Drive Train
Main Transmission
Twin HST
Steering
Twin HST, 2 Lever
Brakes Internally Expanding
Track Size 280×51×72
Tranamission Oil Capacity L 3.2
Dumping System
Dumping System Swivel Dump
Hydraulic
Pump
Type Gear Pump
Max. Speed rpm 2,100
Max. Discharge L/min 16.8
Relief Pressure MPa(kgf/cm
2
) 14.0(145)
Cylinder(Bore X Stroke) mm 465X625
Performance
Max. Angle Degrees 90
Lifting Time Sec approx. 7.4
Lowering Time Sec approx. 5.0
Hydraulic Fluid Capacity L Shared with HST System
Swivel System
Swivel System Hydraulic (Twin cylinder)
Swiveling Angle Degrees 90(Right) - 90 (Left)
Swiveling Time Sec approx. 6.6/180°
Cylinder(Bore X Stroke) mm 50X160
*These specications are subject to change without notice.
Performance and Operating Range
No. Content Quantitiy Note
1 Operator's Manual 1 This Manual
2
Operator's Manual for the Engine 1
3 Engine Service Tool 1
for Servicing the Engine
Contents of the Tool Bag