EasyManua.ls Logo

CanyCom S160 - Fuel Filter

CanyCom S160
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-45-
Maintenance 5
1. Open engine cover.
2. Have an appropriate drain pan.
3. Remove coolant drain plug to drain coolant.
Wash inside radiator.
4. Put drain plug back in place and tighten it
securely.
5. Fill coolant.
6. Close engine cover.
3683M-0506-070E
Coolant Drain Plug
Changing
Fuel Filter
1. Open engine cover.
2. Turn fuel cock to [Off] position.
3. Follow the instructions in the Operator's
Manual for the engine to inspect, clean, or
change fuel lter.
4. Turn fuel cock to [On] position.
5. Close engine cover.
Fuel is highly ammable. Keep re and spark away when servicing fuel lter. If
fuel is spilt, wipe immediately.
3683M-0506-080E
Fuel Filter
Off
On
Fuel Cock
Inspecting/Cleaning
• Coolant Capacity (excluding reservoir): 3.5L
• Reservoir Capacity: 0.7L
Removing radiator cap helps drain the
coolant.
NOTE
• Dispose risidual fuel in fuel lter properly.

Related product manuals