CanyCom S160 - 4 Operation; Preparation; Pre-Start up Inspection; Checking and Filling Fuel

-15-
Operation 4
• Keep re and spark away when handling fuel.
• Always stop the engine before refueling.
• Do not overll fuel so that fuel will not overow. Check fuel gauge when lling.
In case fuel is spilt, wipe out immediately.
Pre-start up Inspection
Preparation
Always perform an inspection before use.
Refer to Maintenance Schedule (page 32) for the inspection schedule and procedure.
Checking and Filling Fuel
1. Insert key into main switch.
2. Turn main switch to [ | (on)] position and
wait a few seconds.
3683M-0401-010E
Off
On
Checking Fuel
3683M-0401-020E
Fuel Gauge
3. Check fuel gauge.
4. Turn main switch to [ (off)] position and
remove key.