CanyCom S160 - Page 45

Maintenance
-36-
5
Item Description
Schedule
Note
PSI
Mon
Year
Hydraulic System
Plumbing
Plumbing shall be free of cracks, damage,
twists, or deterioration.
√ √
There shall be no leaks in pipes, hoses,
joints, or seals.
√ √
Plumbing shall be mounted properly, and
fastening bolts and nuts shall not be loose or
missing.
√ √
Breather shall not be clogged.
√ √
Hydraulic
Cylinders
Shall work smoothly.
√ √
There shall be no leaks when extending and
contracting cylinder.
√ √
Extend dump cylinder fully under load
and hold. Stroke shall be within the range
specied by manufacturer.
√
Cylinder tube and rod shall be free of dents,
cracks, bends, or scratches.
√ √
Cylinder mounting pins shall be free of
damage or excessive wear.
√ √
Body, Chassis, Loading Deck
Chassis
Frame
Shall be free of cracks, deformation, or
corrosion.
√ √
Fastening bolts or nuts shall not be loose or
missing.
√ √
Body Panels
Shall be free of cracks or deformation.
√ √
Doors shall open, close, and lock properly.
√ √ √
Fastening bolts or nuts shall not be loose or
missing.
√ √
Loading Deck
Loading deck shall be raised,lowered and
turned smoothly.
√ √
Shall be free of cracks, deformation, or
corrosion.
√ √
Fastening bolts or nuts shall not be loose or
missing.
√ √
Safety Prop
Safety prop shall be free of any deformation.
√ √
Labels
Warning labels and instruction plates shall
be clean, legible, and free of damage.
√ √ √
Safety Devices
Work Lamp
Work lamp shall work.
√ √ √
Lamp lens shall be free of cracks or chipping
and water shall not be in the lamp.
√ √
Horn
Horn shall work.
√ √ √