Maintenance
-50-
5
5. Wipe excess oil around inspection hole.
Clean inspection plug and filler cap. Put
inspection plug and filler cap back in place
and tighten them securely.
• Oil Capacity: 3.3L
• Oil to Use: Gear Oil, API rating GL-4 or 5,
SAE index #80.
1. Have an appropriate oil drain pan ready.
2. Remove drain plug to drain oil.
3. Clean drain plug and seal washer. Put drain
plug back in place and tighten it securely.
Watch for leaks.
3683M-0507-070E
Drain Plug
Draining
NOTE
Filling
1. Remove ller cap and inspection plug.
2. Fill oil slowly until oil flow out of inspection
hole.
3. Wipe around inspection hole.
4. Clean inspection plug and seal washer. Put
inspection plug back in place and tighten it
securely. Watch for leaks.
5. Put ller cap back in place.
6. Install oor panel.
• Removing ller cap helps drain oil.
NOTE
To Next Page
Loading...
