EasyManua.ls Logo

CapsoVision CapsoAccess CDAS3 - Page 16

CapsoVision CapsoAccess CDAS3
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IFU-2800 Rev E 11/18
15
Manufactured For
CapsoVision, Inc.
18805 Cox Avenue, Suite 250
Saratoga, CA 95070, U.S.A.
Telephone: 408-624-1488
Email: customerservice@capsovision.com
European Authorized
Representative
Dr. Hans-Joachim Lau
Airport Center (Building C)
Flughafenstraße 52a
22335 Hamburg, Germany
Fax: +49 40 53299-100
Conformity Assessment
Body
TÜV Rheinland LGA
Products GmbH
Tillystrasse 2,
90431 Nuremburg
Germany
Contact Information
Protection against harmful ingress of water:
INGRESS PROTECTION (IP21)
Environmental conditions
Operating ....................................10°C to 30°C
Storage / Transportation
............. 10°C to 35°C
Humidity (non-condensing)
Operating ..................................... 20% to 80%
Storage / Transportation
............. 10% to 90%
Altitude
Operating ..................................... 0 to 3000m
Storage / Transportation
............. 0 to 12,000m
The CapsoAccess® Capsule Data Access System
(CDAS3) is intended for general use in hospital
environment for data collection for reference.
Electrical Ratings:
Adapter: HiTron Electronics Corp./ HEMG24-S120200-7
Adapter Input Voltage: 100-240 V AC, 60/50 Hz,
0.46-0.25A
Adapter Output Voltage: 12 V DC, 2A, max 24W
CapsoAccess® Input Voltage: 12 V DC
CapsoAccess® Input Current: 2 A

Table of Contents