Manual
24
Error no.
Possible causes Possible error correction
31
Continuous label mode is set.
Printer has received command statement
via interface, number of lines is < 2
Missing label length.
Deselect continuous mode or transfer
a dummy line with Y coordinates =
label length.
32
Real Time Clock function is selected but the
battery is empty.
Defective RTC.
Change or recharge battery.
Change RTC component.
34 No print memory found. Check memory assembly on CPU.
35 At start of a print order the printhead is up.
Move printhead down and start print
order anew.
36 BCD error.
Invalid format for the calculation of Euro
variable.
Check entered format.
37 BCD error.
Invalid format for the calculation of Euro
variable.
Check entered format.
38 BCD error.
Invalid format for the calculation of Euro
variable.
Check entered format.
39 Flash component error.
Run a software update.
Change CPU.
40
Invalid length of the received command
statement.
Check sent data.
Check connection PC – printer.
42 Drive error Check the entered letter for drive.
43 Drive not formatted. Format your drive.
44 Invalid file name
Check the file name (not allowed
special characters were possibly
used).
45 Path too long Select another path.
47 Directory not file Check the file name.
48 File already open Check if the file is already in use.
49 No file(s) Check the file name.
51 No more memory Check the remaining storage space.
Change the card.
Delete files which are no longer used.
To Next Page
Loading...
