12
The user interface is a colorful 10.4” TFT touch screen.
Navigation is either direct from the touch screen interface
or by connecting to a web interface via the Ethenert IP port
of the controller.
The navigation menus are the same for both connection
methods. Please note that only two web connections may be
authorized at the same time.
Connection from a PC is using a web browser with Java.
In order to access the HMI , the operator should enter the
IP address of the unit in the address bar of the web browser.
The IP address can be viewed or changed from the screen
(see also section 8.2).
Minimum web browser conguration:
• Microsoft Internet Explorer (version 8 or higher) or
Mozilla Firefox (version 3.5.2 or higher). In the advanced
connection options add the unit address to the address
list. Do not use a proxy server.
• Java platform (version 6 or higher). (In the control panel,
click the option that allows storing temporary internet
les and use a direct connection.)
For more information on the web browser and Java platform
conguration, please refer to section 8 “Diagnostics and
communication problem trouble shooting” and contact your
network administrator.
NOTE: Two users can be connected simultaneously with no
priority between users; the last modication will take effect.
4.3.1 - Buttons
Unit is
running
Unit is o Home
Main menu Logged o Logged in
No alarms Alarm/ Alert
Back* Up & Down
* Note that the “Back” button is not present in the main menu.
4.3.2 - Screens
The interface includes the following screens:
• Welcome screen,
• Synoptic screen with direct display of the main
parameters,
• Menu screens for navigation,
• Data/conguration screens listing the parameters by
type,
• Operating mode selection screen,
• Password entry and language selection screen,
• Parameter modication screen,
• Time schedule screen.
NOTE: If the interface is not used for a long period, it will
go into screen saver mode with black screen. The control is
always active, the operating mode remains unchanged. The
interface screen is re-animated when the user presses the
screen. The welcome screen is displayed.
The welcome screen is the rst screen shown after switching
the unit on or after the re-animation of the screen. It displays
the application name as well as current software version
number.
To exit from this screen press the following button:
Go to Home
Screen
Software version number
To Next Page
Loading...
