Carrier PIC 5+ - Connect Control Inputs; Connect Control Outputs

49


In the main conguration menu (see section 7.1), press the
“Display” eld.
The screen below is displayed.
B
D
E
F
C
1 Contrast control
2 Time for the screensaver to be displayed. After the period dened the
screen goes black.
3 Rotation of screen image
4 Resolution
5 Touch screen calibration
“Depending on the user and the position of the panel, it may
be necessary to calibrate the touch screen. When you select
“Touch Screen Calibration”, a white box with cross-hairs will
appear on the display. Touch the center of the cross-hair sight
with a touch pen or similar blunt-ended stylus (please do not
use any metal objects). When the cross-hair sight is touched,
it moves to a new position, where you have to touch the
center of the cross again. When all positions have been
congured, the crosshairs disappear. Click on the now blank
box on the display and check the precision of the setup (the
cursor should move with you). This completes the calibration
and the white box disappears.”
The default values are shown above.


In the main conguration menu (see section 7.1) press the
“Language” eld and select the language for the touch screen
interface conguration menu screens.
NOTE: The supported languages above are separate from
the languages supported by the unit application.