Carrier SmartView - Page 21

Energy Monitoring – ENERGY
Name Status Unit Displayed text* Description
COOLING MODE Cooling mode
cPwrOut - kW Cooling Power Output
cPwrIn - kW Electical Power Input
eer - - Energy Efciency (EER)
cEnergOu - kWh Cooling Energy Output
cEnergIn - kWh Electrical Energy Input
energEer - - Integrated EER
HEATING MODE Heating mode
hPwrOut - kW Heating Power Output
hPwrIn - kW Electical Power Input
cop - - Coef. Of Perf. (COP)
hEnergOu - kWh Heating Energy Output
hEnergIn - kWh Electrical Energy Input
energCop - - Integrated COP
reset_en no/yes - Reset of Energy Counter
Parameter set to "yes" allows to reset the energies displayed in
this table
reset_da - Last Reset Date
reset_ti - Last Reset Time
*Depends on the selected language (English by default).
** The information in this table, based on estimates, is indicative and can not be used as an real energy meter.
*** The powers and energies take account only power of compressors and fans.
Software Options – OPT_STA
Name Status Unit Displayed text* Description
opt5 no/yes
-
OPT5: Medium Brine Parameter set to “yes” means that Medium brine option which
requires the Software Key is activated (see also section 6.23)
opt6 no/yes
-
OPT6: Low Brine Parameter set to “yes” means that Low brine option which
requires the Software Key is activated (see also section 6.23)
opt149 no/yes
-
OPT149: BACnet Parameter set to “yes” means that BACnet option which requires
the Software Key is activated (see also section 6.21)
opt149B no/yes
-
OPT149B: Modbus Parameter set to “yes” means that Modbus option which requires
the Software Key is activated (see also section 6.22)
*Depends on the selected language (English by default).
5 - SMARTVIEW CONTROL: MENU STRUCTURE
21