15
(→) : Press the TARE key.
(←) : Press the POWER/BRK key.
(↓) : Press the CAL/MENU key.
◆ When set to
, satisfactory for most use, the stability mark lights when the display stays
within +/-1 unit (the resolution value of the balance) for a fixed period time
.
◆ When the display shows “ **, *, **, **”, the
currently set conditions are displayed on
**
.
◆ Zero tracking eliminates zero drift, and should be on ( )for normal weighing.
When measuring weight changes over time, or when slowly adding a liquid or powder to the
balance, turn off ( ) the zero tracking feature.
To Next Page
Loading...
