CAS CI-170A - Page 37

38
Menu-PRT.03: Set Print Line feed
Function
Set Print Line feed
Set Range
(0 ~ 9)
Display Part
Meaning
PLFD. 1
Initial Value: 1
Set a spacing between lines as the set value upon printing
Menu-PRT.04: Set Print Condition
Function
Set Print Condition
Set Range
(0 ~ 2)
Display Part
Meaning
PRAN. 0
Print out only if the weight value is +
PRAN. 1
Print out only if the weight value is -
PRAN. 2
Print out regardless of whether the weight value is +/-
Menu-PRT.04: Set Print Out Condition
Function
Set Print Out Condition (Printing condition)
Set Range
(0 ~ 2)
Display Part
Meaning
PRCS. 0
Manual Print
(Printed only if the print key is pushed)
PRCS. 1
Automatic Print
(Printed automatically if the weight value is stabilized)
PRCS. 2
Finish Print
(Printed automatically if the finish signal out in relay operation)