2.3 Programming PLU Data Table II
2.3.1 Ingredient (Menu code 1310)
(MENU -> PLU Data Table II -> Message)
※ You can press the SAVE key at anytime to save the current data and if you want
to exit without saving, press the ESC key.
2. Enter ingredient
EX) Ingredient Line1 = SALT
Ingredient Line 2 = SUGAR
To print “SUGAR” on next line, enter “” after
“SALT” .
1. Enter ingredient number.
This value can be from 1 to 100.
EX) Ingredient number = 1
3. Save Menu
If you want to save, press “PRINT” key.
4. Exit Menu
If you want to exit, press “ESC” key.
To Next Page
Loading...
Need help?
General
