2.8.8 Scale Parameter (Menu code 1870)
(MENU -> Scale Config ->.Scale Parameter)
You can set scale’s environment by changing Parameter Values.
But you must be careful how you deal it.
The Parameters are concerned with Factory Settimg.
So your missing might raise some problems.
2.8.9 Clear Memory (Menu code 1890)
(MENU -> Scale Config -> Clear Memory)
2.8.9.1 Clear PLU (Menu code 1891)
(MENU -> Scale Config -> Clear Memory -> PLU)
Clear all PLU data. This time discount data is will be cleared.
2.8.9.2 Clear Table1 (Menu code 1892)
(MENU -> Scale Config -> Clear Memory -> Table1)
Clear all Table1 date(Except PLU/discount data).
2.8.9.3 Clear Table2 (Menu code 1893)
(MENU -> Scale Config -> Clear Memory -> Table2)
Clear all Table2 date(Except PLU/discount data).
2.8.9.3 Clear ALL (Menu code 1894)
(MENU -> Scale Config -> Clear Memory -> Table2)
NOTE: Clear PLU, Table1, Table2 and Shop data
Symbols and Speed key is initialized
To Next Page
Loading...
Need help?
General
