Firmware Update Procedure
PC Update
3
PC Update
New firmware files will be located in a folder named “patch”.
1. Connect the scale in the same network as the PC.
2. Open the Windows Explorer.
3. In the address bar type: ftp://Scale IP address then press the Enter key.
Ex.) If the scale’s IP Address is 192.168.0.82 you would type in
ftp://192.168.0.82.
4. When ask for User ID and password type in the User ID as “cas” and the
password as “cascl7200” and press the Log On button. (don’t use the
quotation marks)
5. On the PC you will see the scale’s folder structure, copy the Patch folder to
the scale. If prompted, choose replace Patch folder.
To Next Page
Loading...
